Xiaoda Instant Hot Faucet

Xiaoda Instant Hot Faucet by Xiaomi

Xiaoda Instant Hot Faucet by Xiaomi – Pakistan

• Easy to connect and use
  Cold and hot water, worry-free all seasons
• Get hot water in 3 seconds
• Hot and cold switch rotary control adjustment
• Simple assembly and disassembly design
  

Comes with 6 sets of adapters + 1 universal connector, covering almost all common mainstream faucets on the market.

Operating Instructions

1. Install the device and turn on the faucet before powering on the device for the first time, switch the water outlet mode by turning the knob, and check whether there is any leakage in each component
2. Turn the conversion knob upward to the bottom, wait for water to flow out of the spray cap of the instant faucet body, and reach equilibrium
   after a period of time.
3. Then adjust the water flow rate by adjusting the faucet switch to adjust the water temperature. The greater the water flow rate, the lower the water temperature.

Please read and follow the following precautions carefully before installing and using the instant hot water faucet:

1. Warning: Instant heating water faucet should not be installed in places where ice may form. If the water in the water heater is likely to
   freeze, do not connect the water heater to the power supply
2. Do not use this instant hot water faucet upside down
3. Since the capacity of the usual power line in home is relatively less, do not use other high-power household appliances such as electric rice cookers, electric irons, air conditioners, vacuum cleaners, microwave ovens, etc. on same line as instant hot faucet is plugged in and powered on.
4. Make sure to connect the correct wire to right points,
   Yellow–green = Ground wire [⏚]
   Brown = Live/AC wire [L]
   Blue = Neutral wire [N]