Aqara Smart Smoke Detector by Xiaomi

Aqara Smart Smoke Detector by Xiaomi

Aqara Smart Smoke Detector by Xiaomi – Pakistan

Aqara Smart Smoke Detector is a self-contained photoelectric smoke detection alarm that detects fire by sensing smoke.
In case the concentration of smoke is detected to reach the configured threshold value, the detector will immediately release a sound and light alarm signal and send a notice to the mobile phone app via the hub. You shall be on the alert and take immediate and effective measures to troubleshoot the danger, avoiding serious fire accidents.

*An Aqara Zigbee 3.0 hub is required.

Quick Setup
Add Device
1. Before activating the accessory, please make sure you have the Xiaomi Home app downloaded and region set to Chinese Mainland and an Aqara Zigbee 3.0 hub installed.
2. Remove the battery protective film and properly install the battery into the battery compartment.
3. Please open the xiaomi home app and tap “+” in the top right
corner to enter the “Add Device” page. Select “Smoke Detector” under sensor category or it will appear in automatic detection and add it according to instructions in the app.

For installation details please read this >>> English User Manual <<<

*If adding fails, please move the product closer to the hub and try again.

Product Specifications

Smart Smoke Detector
Model: JY-GZ-03AQ
Battery: DC 3V(CR17450)
Wireless Protocol: Zigbee
Dimensions: ⌀104.6 × 42 mm
Operating Temperature: 0°C ~ 40°C
Operating Humidity: 0 ~ 95% RH, no condensation
What is in the Box: Detector × 1, Mounting Plate × 1, Battery × 1,
Adhesive Sticker × 1

Installation instructions are given in this >>> English User Manual <<<

Precautions

1. If you need to carry out construction, renovation and other activities that generate a lot of dust, it is recommended that it be dismantled first to stop dust from entering the interior of the detector, resulting in massive dust accumulation, which causes continuous false alarm in the absence of fire.
2. Please do not disassemble the cover or repair the detector by yourself.
3. A monthly cleaning of the detector cover is recommended to remove dust or dirt. Use a brush or dry lint cloth for cleaning.
4. This product has the function of reporting or notifying “fire alarm” via wireless network, which is affected by the installation environment of the device, the network environment and maintenance conditions of the device and the hub connected to the device, the network environment and conditions of the mobile phone used by the user, and the authorization scope and conditions of the app used
by the user. The manufacturer or producer makes no warranties or promises as to the reliability and timeliness of this function.
5. The product application is at the user’s own risk. In no event shall the manufacturer or producer be liable for any risk, loss, damage, compensation, liability or expense arising from or suffered as a result of any alleged malfunction of the product (including but not limited to failure to deliver push messages, failure of automated execution, etc.) and failure to achieve its efficacy or purpose.
6. This product has the function of “silencing” the sound emitted by the device via the wireless network. When users adopt this function in various scenarios (including but not limited to mobile phone App operation, automation settings), please make sure to check the installation site of the device first to eliminate the hazard or danger of fire at the site, ensuring that it will not lead to fire, explosion and other accidents (such as false alarm of the device) due to “silencing” before operating.